CULTIVATORS / TILLER TYNES :
Cultivators Tynes are the members through which the Showels are attached to the main frame and these are usually made of High Carbon Steel (En - 42 etc.) They may eieither be Press Forged or Close-Die Forged and may further be Heat Treated to impart desired Tensile Strength and Ductility. Alternately the Tynes may also be single piece profile gas cut out of solid MS Plate.

CULTIVATORS / TILLER SPRINGS :
Cultivators Springs enable the Tynes of a Spring Loaded Cultivator to overcome obstacles in the path of tilling and are usually Extension Springs made of special quality Wire Rod (9.2 mm commonly used size) with an ability to withstand extensions upto 100 mm. After coiling these undergo Heat Treatment process for Stress Relieving and Normalizing.

CULTIVATOR / TILLER REVERSIBLE SHOWEL POINTS :
Showels are the components which actually penetrate the soil for the purpose of tilling. They may either be press forged or Close Die Forged from Spring Steel Flat of required size (58 mm X 8 mm - commonly used size). Thereafter these are heat treated to give adequate hardness, wear resistance and ability to withstand impact loading.

3 POINT LINKAGE PINS AND OTHER PINS :
These pins may either be machined from wire rods of desired size or may be first forged and the machine finished to desired shape and sizes. The material may either be Mild Steel or any Carbon Steel depending on the requirements. If required these may be heat treated to obtain desired hardness and ductility.